Overview
Blade and
Boot 'Em Videos
Guarantee
Your Blade Costs
About Cardinal
RR-22,RR-13.5,RR-9
Comparisons:
Standard Thickness
Special Thickness
V & Radius Blades


The Ad Soff-Cut Didn’t Want You To See

Email Us

For the
distributor
nearest you, please call:


1-888-503-3353
Fax 610-828-7798

Welcome!
The Cardinal GM 450 Green Machine
An early entry green concrete saw for dry cutting technique that cost-effectively…
  • eliminates random cracks
  • prevents unsightly raveling
  • minimizes joint chipping and spalling

CARDINAL is the innovator of the industry's original saw for cutting uncured concrete
CARDINAL developed the world's first saw for cutting uncured concrete. And, continuing the tradition of innovation, CARDINAL has developed a concrete saw to handle any size job, indoors or outdoors.

An immediate improvement to your bottom line
The original light weight, available with a 4 1/2 HP gas engine or a 1 1/2 HP electric motor, delivers an immediate boost to your bottom line:

  • Equipped with patented FlatTrac wheels, which permit the cutting operation to proceed often within one or two hours after the finishing process is completed... your time on-the-jobsite is minimized.
  • Has a low price tag yet outperforms more expensive Soff Cut™ saws.
  • Uses the lowest cost, fastest cutting CARDINAL DIAMOND Blades.
  • Does not require expensive skid plates that can scratch and damage concrete surfaces and that need to be replaced with every blade.



The Cardinal GM 450 Green Machine Specifications

Physical/Mechanical Specifications
  Dimensions Handle collapsed – 16” width x 42” length
Handle extended – 16” width x 49” length
  Weight 100 pounds
  Blade raise/lower system Manual release and engagement near handle bar
  Guide system Convenient manual front and rear guides
  Handle Telescoping type with infinitely adjustable length
  Cutting distance from Wall 3-1/4"

Blade Specifications
  Blade type 6.5" diameter x .095" or .225" thick dry cut with patented Z Arbor
  Blade rotation Counter clockwise, up cutting
  Blade shaft speed 5400 rpm
  Cutting depth 1" to 1-1/2" (25 mm - 38 mm) regardless of blade wear
(new blade cutting depth of 1-3/4")

Engine Specifications
  Gas-powered engine 4-1/2 HP (3.2 KW) Subaru Robin Model EX-13 vibration-free, air-cooled 4 cycle, single slant cylinder, overhead camshaft gasoline engine
  Recommended engine speed 3600 RPM
  Optional gas engine 6 HP (4.2 KW) Subaru Robin Model EX-17 vibration-free, air-cooled 4 cycle, single slant cylinder, overhead camshaft gasoline engine
  Optional electric engine 2 HP, 115/230 volt, totally enclosed, fan cooled

Average Cutting Rates*
  Soft aggregates 15 ft/min. (4.7 m/min.)
  Medium aggregates 10 ft/min. (3.0 m/min.)
  Hard aggregates 5 ft/min. (1.6 m/min.)

*Estimates only. Speed will vary with job conditions and concrete mixtures

Blades for Cardinal GM 450 Green Machine Early Entry Concrete Saw
Blade Diameter Blade Thickness

Part Number And Color

Specification

Price

6.5” 0.095” 065ZGA1 PURPLE EE-1 $101.00
6.5” 0.095” 065ZGA2 GREEN EE-2 $101.00
6.5” 0.095” 065ZGA4 RED EE-4 $101.00
6.5” 0.095” 065ZGA6 YELLOW EE-6 $101.00
6.5” 0.225” 065ZGE1 PURPLE EE-1 $191.00
6.5” 0.225” 065ZGE2 GREEN EE-2 $191.00
6.5” 0.225” 065ZGE4 RED EE-4 $191.00
6.5” 0.225” 065ZGE6 YELLOW EE-6 $191.00
Cardinal Saws & Blades
100 Barren Hill Road, Conshohocken, PA  19428
TEL: 1-888-503-3353

*SOFF-CUT is a registered trademark of Soff-Cut International, Inc.
Copyright © 2010 Cardinal Saws & Blades